Skocz do zawartości

Zgemma H.2S+ nie widzi dysku USB.


MrBrzoza

Rekomendowane odpowiedzi

Witam,

 

Od którejś ostatniej aktualizacji mam problem z nagrywaniem, odtwarzaniem, itp z dysku USB.

Do pewnego momentu było wszytko w porządku.

W chwili obecnej dekoder nie widzi dysku, standardowy komunikat nie ma hdd lub nie został zainicjowany.

 

Po podłączeniu dysku fdisk -l widzi go, ale nadal ten sam komunikat.

Po restarcie tunera fdisk -l już go nie widzi. Dopiero po odłączeniu i podłączeniu.

 

Ale i tak nadal komunikat nie ma hdd lub nie został zainicjowany.

 

Proszę o jakąś podpowiedź.

 

fdisk -l po restarcie

 

GraterliaOS:~# fdisk -l
Dysk /dev/mtdblock0: 256 MiB, bajtów: 268435456, sektorów: 524288
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512


Dysk /dev/mtdblock1: 6 MiB, bajtów: 6291456, sektorów: 12288
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512


Dysk /dev/mtdblock2: 250 MiB, bajtów: 262144000, sektorów: 512000
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512

 

fdisk -l po odłączeniu i podłączaniu dysku

 

GraterliaOS:~# fdisk -l                                                         Dysk /dev/mtdblock0: 256 MiB, bajtów: 268435456, sektorów: 524288
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512


Dysk /dev/mtdblock1: 6 MiB, bajtów: 6291456, sektorów: 12288
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512


Dysk /dev/mtdblock2: 250 MiB, bajtów: 262144000, sektorów: 512000
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512


Dysk /dev/sda: 465,8 GiB, bajtów: 500107862016, sektorów: 976773168
Model dysku: FreeAgent Go
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Typ etykiety dysku: dos
Identyfikator dysku: 0x084ccb92

Urządzenie Rozruch Początek    Koniec   Sektory Rozmiar Id Typ
/dev/sda1              2048 976773167 976771120  465,8G 83 Linux

 

tune2fs -l /dev/sda1

 

tune2fs 1.44.5 (15-Dec-2018)
Filesystem volume name:   records
Last mounted on:          /media/hdd
Filesystem UUID:          d3f32aca-dde5-44bd-9bb1-7fd55853d83c
Filesystem magic number:  0xEF53
Filesystem revision #:    1 (dynamic)
Filesystem features:      has_journal ext_attr resize_inode dir_index filetype sparse_super large_file
Filesystem flags:         signed_directory_hash
Default mount options:    user_xattr acl
Filesystem state:         clean
Errors behavior:          Continue
Filesystem OS type:       Linux
Inode count:              30531584
Block count:              122096390
Reserved block count:     6104819
Free blocks:              119899514
Free inodes:              30531572
First block:              0
Block size:               4096
Fragment size:            4096
Reserved GDT blocks:      994
Blocks per group:         32768
Fragments per group:      32768
Inodes per group:         8192
Inode blocks per group:   512
Filesystem created:       Sat Jan  5 14:23:38 2019
Last mount time:          Sat Jan  5 14:32:40 2019
Last write time:          Sat Jan  5 14:33:16 2019
Mount count:              1
Maximum mount count:      -1
Last checked:             Sat Jan  5 14:23:38 2019
Check interval:           0 (<none>)
Lifetime writes:          1796 kB
Reserved blocks uid:      0 (user root)
Reserved blocks gid:      0 (group root)
First inode:              11
Inode size:               256
Required extra isize:     32
Desired extra isize:      32
Journal inode:            8
Default directory hash:   half_md4
Directory Hash Seed:      b579f167-6917-460b-8495-15068ce03fac
Journal backup:           inode blocks

 

i przy okazji

 

rootfs          /               auto            defaults                        1       1
proc            /proc           proc            defaults                        0       0
devpts          /dev/pts        devpts          mode=0620,gid=5                 0       0
usbdevfs        /proc/bus/usb   usbdevfs        noauto                          0       0
#usbfs          /proc/bus/usb   usbfs           defaults                        0       0
#tmpfs          /var/volatile   tmpfs           defaults                        0       0

LABEL=records   /media/hdd      auto            defaults,noatime,nodiratime     1       1
#LABEL=data     /media/data     auto            defaults,noatime,nodiratime     1       1
#LABEL=swap     swap            swap            defaults                        0       0

Odnośnik do komentarza
Udostępnij na innych stronach

Hej tux[/member]

 

po restarcie

 

GraterliaOS:~# cfdisk /dev/sda
cfdisk: nie można otworzyć /dev/sda: Nie ma takiego pliku ani katalogu
GraterliaOS:~#

 

po odłączeniu i podłączeniu dysku

 

GraterliaOS:~# cfdisk /dev/sda
                                 Dysk: /dev/sda
         Rozmiar: 465,8 GiB, bajtów: 500107862016, sektorów: 976773168
                    Etykieta: dos, identyfikator: 0x084ccb92

    Urządzenie   Rozruch    Początek     Koniec    Sektory  Rozmiar  Id Typ
>>  /dev/sda1                   2048  976773167  976771120   465,8G  83 Linux







lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x           Typ partycji: Linux (83)                                         x
x    UUID systemu plików: d3f32aca-dde5-44bd-9bb1-7fd55853d83c               x
xEtykieta systemu plików: records                                            x
x          System plików: ext3                                               x
x       Punkt montowania: /media/hdd                                         x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
   [    Rozruch    ]  [      Usuń     ]  [Zmiana rozmiaru]  [    Zakończ    ]
   [      Typ      ]  [     Pomoc     ]  [     Zapisz    ]  [     Zrzut     ]

                     Zakończenie programu bez zapisu zmian

Odnośnik do komentarza
Udostępnij na innych stronach

Sprawdzam, tylko nie wiem czy to ma sens.

Wcześniej już wymieniłem dysk na inny i kabelek USB też na inny.

Pierwszy dysk po podłączeniu do PC widać, pliki nagranych filmów można bez problemu zgrać.

 

Po wymianie dysku i kabelka USB to samo. :-(

 

Ale jak będę miał wynik dam znać.

 

Wynik

 

GraterliaOS:~# fsck -f /dev/sda1
fsck z pakietu util-linux 2.33
e2fsck 1.44.5 (15-Dec-2018)
Przebieg 1: Sprawdzanie i-węzłów, bloków i rozmiarów
Przebieg 2: Sprawdzanie struktury katalogów
Przebieg 3: Sprawdzanie łączności katalogów
Przebieg 4: Sprawdzanie liczników odwołań
Przebieg 5: Sprawdzanie sumarycznych informacji o grupach
records: 12/30531584 plików (8.3% nieciągłych), 2196875/122096390 bloków
GraterliaOS:~#

Odnośnik do komentarza
Udostępnij na innych stronach

  • 4 tygodnie później...

Witam ponownie,

 

Przepraszam, że to nie ten wieczór ale, praca, dom, rodzina a TV działa i można oglądać.

 

Dysk po pełnym restarcie i ręcznym montowaniu działa. Działa także po restarcie GUI.

Jednakże po restarcie tunera trzeba go odłączyć i podłączyć i ponownie ręcznie zamontować.

 

Poniżej log debug. Mam nadzieję, że o to chodziło.

 

[Avahi] Not running yet, cannot browse for type _e2stream._tcp.
[eInit] + (1) Background File Eraser
[eInit] + (5) Tuxtxt
[eInit] + (8) graphics acceleration manager
[eInit] + (9) Font Render Class
[font] initializing lib...
[font] loading fonts...
[font] Intializing font cache, using max. 4MB...
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=4
[eInit] + (9) gLCD
[eFbLCD] /dev/fb1: No such file or directory
[eFbLCD] framebuffer /dev/fb1 not available
[eDboxLCD] xres=132, yres=64, bpp=8 lcd_type=1
[eLCD] (132x64x8) buffer 0x7c8798 8448 bytes, stride 132
[gLCDDC] resolution: 132x64x8 stride=132
[eInit] + (9) GFBDC
[fb] /dev/fb0: 24300k video mem
[fb] double buffering available!
[gFBDC] resolution: 1920x1080x32 stride=7680, 8100kB available for acceleration surfaces.
[eInit] + (10) gRC
[gRC] thread created successfully
[eInit] + (15) eWindowStyleManager
[eInit] + (20) AVSwitch Driver
[eAVSwitch] failed to open /dev/fp0 to monitor vcr scart slow blanking changed: No such file or directory
[eInit] + (20) misc options
[eInit] + (20) RC Input layer
[eInit] + (20) UHF Modulator
[eRFmod] couldnt open /dev/rfmod0: No such file or directory
[eInit] + (20) DVB-CI UI
[eInit] + (21) input device driver
[eInputDeviceInit] adding device /dev/input/event0
[eRCInputEventDriver] devicename=front panel
[eRCInputEventDriver] devicename=front panel
[eRCDeviceInputDev] device "front panel" is a remotecontrol
[eInputDeviceInit] adding device /dev/input/event1
[eRCInputEventDriver] devicename=dreambox remote control (native)
[eRCInputEventDriver] devicename=dreambox remote control (native)
[eRCDeviceInputDev] device "dreambox advanced remote control (native)" is a remotecontrol
[eInputDeviceInit] adding device /dev/input/event2
[eRCInputEventDriver] devicename=dreambox advanced remote control (native)
[eRCInputEventDriver] devicename=dreambox advanced remote control (native)
[eRCDeviceInputDev] device "dreambox advanced remote control (native)" is a remotecontrol
[eInputDeviceInit] adding device /dev/input/event3
[eRCInputEventDriver] devicename=front panel
[eRCInputEventDriver] devicename=front panel
[eRCDeviceInputDev] device "front panel" is a remotecontrol
[eInputDeviceInit] adding device /dev/input/event4
[eRCInputEventDriver] devicename=RC for hdmi_cec
[eRCInputEventDriver] devicename=RC for hdmi_cec
[eRCDeviceInputDev] device "RC for hdmi_cec" is a remotecontrol
[eInputDeviceInit] Found 5 input devices.
[eInit] + (22) Hdmi CEC driver
[eInit] + (30) eActionMap
[eInit] + (35) CA handler
[eInit] + (35) CI Slots
[CI] scanning for common interfaces..
[CI] eDVBCIInterfaces setInputSource(0, A)
[CI] eDVBCIInterfaces setInputSource(1, B)
[CI] eDVBCIInterfaces setInputSource(2, C)
[CI] eDVBCIInterfaces setInputSource(3, D)
[CI] done, found 0 common interface slots
[eInit] + (40) eServiceCenter
[eServiceCenter] settings instance.
[eInit] + (41) Stream server
[Avahi] Not running yet, cannot register type _e2stream._tcp.
[eInit] + (41) Encoders
[eInit] + (41) eServiceFactoryDVB
[eInit] + (41) eServiceFactoryFS
[eInit] + (41) eServiceFactoryM2TS
[eInit] + (41) eServiceFactoryHDMI
[eInit] + (41) eServiceFactoryTS
[eInit] + (41) eServiceFactoryWebTS
[eInit] + (41) eServiceFactoryDVD
[eInit] reached rl 70
[eDVBDB] ---- opening lame channel db
[eDVBDB] reading services (version 4)
[eDVBDB] loaded 33 channels/transponders and 398 services
eDVBSatelliteEquipmentControl::clear()
[eDVBResourceManager] scanning for frontends..
[eDVBFrontend0] opening frontend
[eDVBFrontend0] opening frontend
[eDVBFrontend0] frontend 0 has DVB API 50a 
[eDVBFrontend0] close frontend
[eDVBFrontend1] opening frontend
[eDVBFrontend1] opening frontend
[eDVBFrontend1] frontend 1 has DVB API 50a 
[eDVBFrontend1] close frontend
[eDVBFrontend2] opening frontend
[eDVBFrontend2] opening frontend
[eDVBFrontend2] frontend 2 has DVB API 50a 
[eDVBFrontend2] close frontend
[eDVBAdapterLinux] get demux 0
[eDVBAdapterLinux] get demux 1
[eDVBAdapterLinux] get demux 2
[eDVBAdapterLinux] get demux 3
[eDVBAdapterLinux] get demux 4
[eDVBAdapterLinux] get demux 5
[eDVBAdapterLinux] get demux 6
[eDVBAdapterLinux] get demux 7
[eDVBResourceManager] found 1 adapter, 3 frontends(3 sim) and 8 demux
[eDVBLocalTimeHandler] Use valid Linux Time :) (RTC?)
[eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
[MAIN] Loading spinners...
[MAIN] found 20 spinner!
[setIoPrio] best-effort level 3 ok
[Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: No such file or directory
[HardwareInfo] Scanning hardware info
Detected: h3 (1-2)
[Harddisk] enumerating block devices...
[Harddisk] Unable to determine structure of /dev
[Harddisk] new device sda ->  -> 
[Console] command: ('sdparm', 'sdparm', '--set=SCT=0', '')
[eConsoleAppContainer] Starting sdparm
Activating keymap: Default (US)
[Console] command: loadkmap < /usr/share/keymaps/default.kmap
[eConsoleAppContainer] Starting /bin/sh
Activating language Polski
[NimManager] Reading satellites.xml
[NimManager] Reading cables.xml
[NimManager] Reading terrestrial.xml
[gRC] main thread is non-idle! display spinner!
eDVBSatelliteEquipmentControl::clear()
[secConfigure] sec config cleared
[eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7346 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 1 to slotid 1, descr Si2169D, need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 2 to slotid 2, descr Si2169, need rotorworkaround No, enabled Yes, DVB-S2 No
[secConfigure] slot: 0 configmode: simple
[eDVBSatelliteEquipmentControl::setSlotNotLinked] slot=0
[secConfigure] diseqcmode:  diseqc_a_b
[eDVBSatelliteEquipmentControl::addLNB] lnb=0)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setRepeats] repeat=0
[eDVBSatelliteEquipmentControl::setFastDiSEqc] onoff=0
[eDVBSatelliteEquipmentControl::setSeqRepeat] onoff=0
[eDVBSatelliteEquipmentControl::setCommandOrder] order=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=1
[eDVBSatelliteEquipmentControl::setToneburst] toneburst=0
[eDVBSatelliteEquipmentControl::setCommittedCommand] command=0
[eDVBSatelliteEquipmentControl::setUncommittedCommand] command=0
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=130
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=1
[eDVBSatelliteEquipmentControl::addLNB] lnb=1)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setRepeats] repeat=0
[eDVBSatelliteEquipmentControl::setFastDiSEqc] onoff=0
[eDVBSatelliteEquipmentControl::setSeqRepeat] onoff=0
[eDVBSatelliteEquipmentControl::setCommandOrder] order=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=1
[eDVBSatelliteEquipmentControl::setToneburst] toneburst=0
[eDVBSatelliteEquipmentControl::setCommittedCommand] command=1
[eDVBSatelliteEquipmentControl::setUncommittedCommand] command=0
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=130
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=1
[secConfigure] slot: 1 configmode: simple
[eDVBSatelliteEquipmentControl::setSlotNotLinked] slot=1
[secConfigure] diseqcmode:  diseqc_a_b
[eDVBSatelliteEquipmentControl::addLNB] lnb=2)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setRepeats] repeat=0
[eDVBSatelliteEquipmentControl::setFastDiSEqc] onoff=0
[eDVBSatelliteEquipmentControl::setSeqRepeat] onoff=0
[eDVBSatelliteEquipmentControl::setCommandOrder] order=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=1
[eDVBSatelliteEquipmentControl::setToneburst] toneburst=0
[eDVBSatelliteEquipmentControl::setCommittedCommand] command=0
[eDVBSatelliteEquipmentControl::setUncommittedCommand] command=0
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=130
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=2
[eDVBSatelliteEquipmentControl::addLNB] lnb=3)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setRepeats] repeat=0
[eDVBSatelliteEquipmentControl::setFastDiSEqc] onoff=0
[eDVBSatelliteEquipmentControl::setSeqRepeat] onoff=0
[eDVBSatelliteEquipmentControl::setCommandOrder] order=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=1
[eDVBSatelliteEquipmentControl::setToneburst] toneburst=0
[eDVBSatelliteEquipmentControl::setCommittedCommand] command=1
[eDVBSatelliteEquipmentControl::setUncommittedCommand] command=0
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=130
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=2
[secConfigure] sec config completed
[eDVBFrontend2] opening frontend
[eDVBFrontend2] setDeliverySystem setting type to 1 from 0
[eDVBFrontend2] setDeliverySystem succefully changed delivery system to DVB-C
[initNimManager] tunerTypeChanged feid 2 to mode 0
eDVBSatelliteEquipmentControl::clear()
[secConfigure] sec config cleared
[eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7346 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 1 to slotid 1, descr Si2169D, need rotorworkaround No, enabled Yes, DVB-S2 Yes
[eDVBFrontend] setSlotInfo for dvb frontend 2 to slotid 2, descr Si2169, need rotorworkaround No, enabled Yes, DVB-S2 No
[secConfigure] slot: 0 configmode: simple
[eDVBSatelliteEquipmentControl::setSlotNotLinked] slot=0
[secConfigure] diseqcmode:  diseqc_a_b
[eDVBSatelliteEquipmentControl::addLNB] lnb=0)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setRepeats] repeat=0
[eDVBSatelliteEquipmentControl::setFastDiSEqc] onoff=0
[eDVBSatelliteEquipmentControl::setSeqRepeat] onoff=0
[eDVBSatelliteEquipmentControl::setCommandOrder] order=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=1
[eDVBSatelliteEquipmentControl::setToneburst] toneburst=0
[eDVBSatelliteEquipmentControl::setCommittedCommand] command=0
[eDVBSatelliteEquipmentControl::setUncommittedCommand] command=0
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=130
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=1
[eDVBSatelliteEquipmentControl::addLNB] lnb=1)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setRepeats] repeat=0
[eDVBSatelliteEquipmentControl::setFastDiSEqc] onoff=0
[eDVBSatelliteEquipmentControl::setSeqRepeat] onoff=0
[eDVBSatelliteEquipmentControl::setCommandOrder] order=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=1
[eDVBSatelliteEquipmentControl::setToneburst] toneburst=0
[eDVBSatelliteEquipmentControl::setCommittedCommand] command=1
[eDVBSatelliteEquipmentControl::setUncommittedCommand] command=0
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=130
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=1
[secConfigure] slot: 1 configmode: simple
[eDVBSatelliteEquipmentControl::setSlotNotLinked] slot=1
[secConfigure] diseqcmode:  diseqc_a_b
[eDVBSatelliteEquipmentControl::addLNB] lnb=2)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setRepeats] repeat=0
[eDVBSatelliteEquipmentControl::setFastDiSEqc] onoff=0
[eDVBSatelliteEquipmentControl::setSeqRepeat] onoff=0
[eDVBSatelliteEquipmentControl::setCommandOrder] order=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=1
[eDVBSatelliteEquipmentControl::setToneburst] toneburst=0
[eDVBSatelliteEquipmentControl::setCommittedCommand] command=0
[eDVBSatelliteEquipmentControl::setUncommittedCommand] command=0
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=130
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=2
[eDVBSatelliteEquipmentControl::addLNB] lnb=3)
eDVBSatelliteEquipmentControl::setLNBSatCRformat(0)
[eDVBSatelliteEquipmentControl::setLNBNum] lnbnum=1
[eDVBSatelliteEquipmentControl::setLNBLOFL] logfl=9750000
[eDVBSatelliteEquipmentControl::setLNBLOFH] lofh=10600000
[eDVBSatelliteEquipmentControl::setLNBThreshold] threshold=11700000
[eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage] onoff=0
[eDVBSatelliteEquipmentControl::setRepeats] repeat=0
[eDVBSatelliteEquipmentControl::setFastDiSEqc] onoff=0
[eDVBSatelliteEquipmentControl::setSeqRepeat] onoff=0
[eDVBSatelliteEquipmentControl::setCommandOrder] order=0
[eDVBSatelliteEquipmentControl::setDiSEqcMode] mode=1
[eDVBSatelliteEquipmentControl::setToneburst] toneburst=0
[eDVBSatelliteEquipmentControl::setCommittedCommand] command=1
[eDVBSatelliteEquipmentControl::setUncommittedCommand] command=0
[eDVBSatelliteEquipmentControl::addSatellite] orb_pos=130
[eDVBSatelliteEquipmentControl::setVoltageMode] mode=0
[eDVBSatelliteEquipmentControl::setToneMode] mode=0
[eDVBSatelliteEquipmentControl::setLNBSlotMask] slotmask=2
[secConfigure] sec config completed
[Picon] adding path: /usr/share/enigma2/picon/
[ML] BlurayPlayer not installed: cannot import name BlurayPlayer
[eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
[eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.01_ncplus.tv
[eDVBDB] 224 entries in Bouquet userbouquet.01_ncplus.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.02_cyfrowy_polsat.tv
[eDVBDB] 998 entries in Bouquet userbouquet.02_cyfrowy_polsat.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.03_smart_hd.tv
[eDVBDB] 64 entries in Bouquet userbouquet.03_smart_hd.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.04_domowy_hd.tv
[eDVBDB] 64 entries in Bouquet userbouquet.04_domowy_hd.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.05_ogolnotematyczne.tv
[eDVBDB] 24 entries in Bouquet userbouquet.05_ogolnotematyczne.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.06_filmowe.tv
[eDVBDB] 50 entries in Bouquet userbouquet.06_filmowe.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.07_sportowe.tv
[eDVBDB] 30 entries in Bouquet userbouquet.07_sportowe.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.08_informacyjne.tv
[eDVBDB] 11 entries in Bouquet userbouquet.08_informacyjne.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.09_dokumentalne.tv
[eDVBDB] 25 entries in Bouquet userbouquet.09_dokumentalne.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.10_rozrywkowe_i_muzyczne.tv
[eDVBDB] 24 entries in Bouquet userbouquet.10_rozrywkowe_i_muzyczne.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.11_lifestylowe.tv
[eDVBDB] 15 entries in Bouquet userbouquet.11_lifestylowe.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.12_dla_dzieci.tv
[eDVBDB] 15 entries in Bouquet userbouquet.12_dla_dzieci.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.13_polskojezyczne.tv
[eDVBDB] 204 entries in Bouquet userbouquet.13_polskojezyczne.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.14_IPTV.tv
[eDVBDB] 17 entries in Bouquet userbouquet.14_IPTV.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.15_erotyczne.tv
[eDVBDB] 23 entries in Bouquet userbouquet.15_erotyczne.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.16_radio.tv
[eDVBDB] 18 entries in Bouquet userbouquet.16_radio.tv
[eDVBDB] 17 entries in Bouquet bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
[eDVBDB] 14 entries in Bouquet userbouquet.favourites.radio
[eDVBDB] 1 entries in Bouquet bouquets.radio
[eDVBDB] Renumbering...
[eDVBLocalTimeHandler] disable sync local time with transponder time!
[font] adding font /usr/share/fonts/LiberationSans-Regular.ttf -> Regular
[font] adding font /usr/share/fonts/LiberationMono-Regular.ttf -> Fixed
[font] adding font /usr/share/fonts/LiberationMono-Regular.ttf -> Console
[font] adding font /usr/share/fonts/LiberationMono-Regular.ttf -> VkeybFont
[font] adding font /usr/share/fonts/Aller_Rg.ttf -> Regular
[font] adding font /usr/share/fonts/Aller_Bd.ttf -> Bold
[font] adding font /usr/share/fonts/tuxtxt.ttf -> Console
[font] adding font /usr/share/fonts/Aller_It.ttf -> ChSelDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> EPGSelDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> EvDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> GraphDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> SIDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> MovDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> CoolTVDesc
[font] adding font /usr/share/fonts/LiberationSans-Regular.ttf -> Subs
[font] adding font /usr/share/fonts/LiberationSans-Italic.ttf -> Subsi
[font] adding font /usr/share/fonts/LiberationSans-Bold.ttf -> Subsb
[font] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf -> Subsz
[font] adding font /usr/share/fonts/Aller_Rg.ttf -> Regular
[font] adding font /usr/share/fonts/Aller_Bd.ttf -> Bold
[font] adding font /usr/share/fonts/tuxtxt.ttf -> Console
[font] adding font /usr/share/fonts/Aller_It.ttf -> ChSelDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> EPGSelDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> EvDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> GraphDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> SIDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> MovDesc
[font] adding font /usr/share/fonts/Aller_It.ttf -> CoolTVDesc
[iInputDevices] getInputDevices by-path <ERROR: ioctl(EVIOCGNAME): [Errno 21] Jest katalogiem: '/dev/input/by-path' >
Unknown device type: RC for hdmi_cec
Unknown device type: front panel
Unknown device type: front panel
--> setting scaler_sharpness to: 0000000D
[eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
[eDVBDB] Renumbering...
[eTuxttxtApp] enable caching
[keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
[Console] command: ('/sbin/ip_e2', '/sbin/ip_e2', 'eth0')
[eConsoleAppContainer] Starting /sbin/ip_e2
[eDboxLCD] setLCDBrightness 25
[eDboxLCD] setLCDBrightness 127
[infinityFHDcontroller] set language to  pl
[infinityFHDcontroller] set language to  pl
[GOSlocale] binding plugin-YouTube.mo as 'plugin-YouTube' domain
[GOSlocale] AutoDomains 'YouTube'
[GOSlocale] AutoDomains 'Watch YouTube videos'
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/Sansation_Italic.ttf -> AP_SansIt
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/Briskn.ttf -> AP_Title
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/Roboto-Regular.ttf -> AP_Regular
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/EFNRobin.ttf -> AP_Val1
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/Monspacb.ttf -> AP_Val_desc1
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/Sansation_Regular.ttf -> AP_Val2
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/Sansation_Regular.ttf -> AP_Val_desc2
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/DejaVuSansCondensed.ttf -> AP_Val3
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/DejaVuSansCondensed.ttf -> AP_Val_desc3
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/MyriadPro-Semibold.otf -> SemiboldLCD
[font] adding font /usr/lib/enigma2/python/Plugins/Extensions/AirlyPoland/font/Sansation_Bold.ttf -> SanBold
Current Picon Path : /usr/share/enigma2/picon/
getFPVersion failed!
[OpenWebif] -D- tuner '0' 'BCM7346 (internal)' 'Tuner A'
[OpenWebif] -D- tuner '1' 'Si2169D' 'Tuner B'
[OpenWebif] -D- tuner '2' 'Si2169' 'Tuner C'
Plugin  Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[VfdControl] set language to  pl
[VideoHardware] reading preferred modes override, using all video modes
[VideoHardware] getModeList for port DVI-PC
[VideoHardware] remove DVI-PC because of not existing modes
[VideoHardware] getModeList for port DVI
[VideoHardware] getModeList for port RCA
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[VideoHardware] setMode - port: DVI mode: 720p rate: multi
[VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[eHdmiCEC] send message 8E 00
[eInit] + (41) eServiceFactoryMP3
[eEPGCache] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop
[skin] Processing screen: Screensaver
[skin] Processing screen: SecondInfoBar
[skin] Processing screen: SecondInfoBarSimple
[sKIN] Parsing embedded skin <embedded-in-'HideVBILine'>
[skin] Processing screen: <embedded-in-'HideVBILine'>
[skin] Processing screen: ChannelSelection
[skin] Processing screen: RdsInfoDisplay
[skin] Processing screen: RdsInfoDisplaySummary
[skin] Processing screen: UnhandledKey
[sKIN] Parsing embedded skin <embedded-in-'Dish'>
[skin] Processing screen: <embedded-in-'Dish'>
[skin] Processing screen: BufferIndicator
[skin] Processing screen: TimeshiftState
[skin] Processing screen: TimeshiftLive
no teletext plugin found!
[skin] Processing screen: SubtitleDisplay
RemovePopup, id = ZapError
[skin] Processing screen: InfoBar
[eEPGCache] 36748 events read from /hdd/epg.dat
[skin] Processing screen: InfoBarSummary
[skin] Processing screen: Volume
warning, skin is missing element VolumeText in <class 'Screens.Volume.Volume'>
[skin] Processing screen: Mute
setValue 85
[eDVBVolumecontrol] Setvolume: raw: 85 85, -1db: 10 10
[skin] Processing screen: Scart
[eDVBFrontend2] close frontend
[eDVBFrontend2] sendTone allowed only in feSatellite (1)
playing 1:0:1:132B:33F4:13E:820000:0:0:0::TVP POLONIA
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /hdd/timeshift/ statfs failed: Nie ma takiego pliku ani katalogu
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /hdd/timeshift/ statfs failed: Nie ma takiego pliku ani katalogu
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /hdd/timeshift/ statfs failed: Nie ma takiego pliku ani katalogu
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift /hdd/timeshift/ statfs failed: Nie ma takiego pliku ani katalogu
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 33f4:013e
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 10000
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 2
[eDVBSatelliteEquipmentControl] lnb 2 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 3 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 10000
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBFrontend0] opening frontend
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 0
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 130 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 10000
[eDVBSatelliteEquipmentControl] score new 10000
[eDVBSatelliteEquipmentControl] final score 10004
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 0 Freq 11179000 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 130 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
[eDVBFrontend0] tuning to 1429 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:132B:33F4:13E:820000:0:0:0::TVP POLONIA
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[Console] finished: ('/sbin/ip_e2', '/sbin/ip_e2', 'eth0')
[Console] command: route -n | grep eth0
[eConsoleAppContainer] Starting /bin/sh
[eDVBFrontend0] set static current limiting
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 4
[eDVBFrontend0] setVoltage 2
[eDVBFrontend0] sleep 200ms
[Console] finished: route -n | grep eth0
0.0.0.0
192.168
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 201]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 201], 'up': True, 'mac': '00:17:9a:22:2b:df', 'dhcp': False, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
SerienRecorder plugin not found
EPG Refresh Plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[Avahi] Not running yet, cannot register type _http._tcp.
[eDVBFrontend0] invalidate current switch params
[eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend0] sleep 50ms
[eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
[eDVBFrontend0] sleep 150ms
[eDVBFrontend0] sendDiseqc: e01038f2(?)
[eDVBFrontend0] sleep 100ms
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] set sequence pos 3
[eDVBFrontend0] update current switch params
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1413818 running
[eEPGCache] channel 0x1413818 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eEPGCache] next update in 2 sec
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (07c6), and 1 audio stream(s) (0ce8), and the pcr pid is 07c6, and the text pid is 0ce9
[eDVBChannel] getDemux cap=01
[eTSMPEGDecoder] decoder state: play, vpid=07c6, apid=0ce8
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x07c6 ok
[eDVBPCR0] DEMUX_START ok
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x0ce8 ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=0 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 0 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x07c6 ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBText0] DMX_SET_PES_FILTER pid=0x0ce9 ok
[eDVBText0] DEMUX_START ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] AUDIO_CHANNEL_SELECT 0 ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] starting PES reader on pid=0ce9
[eDVBPESReader] DMX_SET_PES_FILTER pid=0ce9
[eDVBCAService] new service 1:0:1:132B:33F4:13E:820000:0:0:0::TVP POLONIA
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:132B:33F4:13E:820000:0:0:0::TVP POLONIA
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 0438 for service_id 132b
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=1080
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=1025
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=1080
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (07c6), and 2 audio stream(s) (07c7, 0ce8), and the pcr pid is 07c6, and the text pid is 0ce9
[eTSMPEGDecoder] decoder state: play, vpid=07c6, apid=0ce8
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=1080
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=1069
[eDVBServicePMTHandler] sdt update done!
[eDVBFrontend0] set dynamic current limiting
[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 720x576 aspect 3
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
[eEPGCache] start caching events(1548936976)
[eDVBSectionReader] DMX_SET_FILTER pid=3842
[eDVBSectionReader] DMX_SET_FILTER pid=3003
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=57

 

W międzyczasie trochę pogrzebałem i może to jest inny problem.

Poniżej mały log z połączenia FTP.

 

Status:	Uzyskiwanie listy katalogów w "/usr/share/enigma2"...
Polecenie:	CWD enigma2
Odpowiedź	250 Directory successfully changed.
Polecenie:	PWD
Odpowiedź	257 "/usr/share/enigma2" is the current directory
Polecenie:	PASV
Odpowiedź	227 Entering Passive Mode (192,168,1,201,214,145).
Polecenie:	LIST
Odpowiedź	150 Here comes the directory listing.
Odpowiedź	500 OOPS: invalid inode size in vsf_sysutil_statbuf_get_size
Błąd:	Nie udało się otrzymać listy katalogów
Status:	Połączenie zakończone przez serwer

 

Pozdrawiam,

Odnośnik do komentarza
Udostępnij na innych stronach

Odnośnie pierwszego loga to chodziło mi o zrzut z "debug" czyli z gniazda debug w tunerze. Inaczej pisząc, log z informacją o starcie systemu operacyjnego.

 

Odnośnie drugiego loga to już raz widziałem coś takiego. Jeszcze nie mam pojęcia o co chodzi.

W solnej chwili przyjrzymy się temu. Podobny przypadek też dotyczył Zgemma H2S.

Odnośnik do komentarza
Udostępnij na innych stronach

Witam,

 

Co do pierwszego loga i debug ze złącza to jak na razie jest poza moją wiedzą w temacie dekoderów. Postaram się w wolnej chwili doczytać.

Jeżeli chodzi o dysk to nawet podejrzewałem elektronikę w obudowie. Ale wymiana obudowy plus kolejny inny dysk i kabel, i nadal to samo.

W sumie mogę nie marudzić, ale mieszkanie na wsi, gdzie "czasem" wyłączają prąd powoduje, że trzeba odpiąć, podpiąć dysk i ręcznie montować.

 

Co do drugiego loga to się trochę zmartwiłem, bo przeczytałem na zagranicznych forach że może być to problem z błędami pamięci dekodera.

Tutaj też niestety moja wiedza na poziomie dekoderów i linux się kończy.

 

GraterliaOS:~# fsck -y /dev/mtdblock0
fsck z pakietu util-linux 2.33.1
e2fsck 1.44.5 (15-Dec-2018)
ext2fs_open2: Błędna liczba magiczna w superbloku
fsck.ext2: Superblok błędny, próba użycia zapasowych bloków...
fsck.ext2: Błędna liczba magiczna w superbloku podczas próby otworzenia /dev/mtdblock0

superblok nie mógł być odczytany lub nie opisuje prawidłowego systemu
plików ext2/ext3/ext4. Jeżeli urządzenie jest prawidłowe i naprawdę zawiera
system plików ext2/ext3/ext4 (nie jest swapem, ufs-em ani niczym innym),
to superblok jest uszkodzony - można próbować uruchomić e2fsck z innym
superblokiem:
    e2fsck -b 8193 <urządzenie>
lub
    e2fsck -b 32768 <urządzenie>

GraterliaOS:~# fsck -y /dev/mtdblock1
fsck z pakietu util-linux 2.33.1
e2fsck 1.44.5 (15-Dec-2018)
ext2fs_open2: Błędna liczba magiczna w superbloku
fsck.ext2: Superblok błędny, próba użycia zapasowych bloków...
fsck.ext2: Błędna liczba magiczna w superbloku podczas próby otworzenia /dev/mtdblock1

superblok nie mógł być odczytany lub nie opisuje prawidłowego systemu
plików ext2/ext3/ext4. Jeżeli urządzenie jest prawidłowe i naprawdę zawiera
system plików ext2/ext3/ext4 (nie jest swapem, ufs-em ani niczym innym),
to superblok jest uszkodzony - można próbować uruchomić e2fsck z innym
superblokiem:
    e2fsck -b 8193 <urządzenie>
lub
    e2fsck -b 32768 <urządzenie>

GraterliaOS:~# fsck -y /dev/mtdblock2
fsck z pakietu util-linux 2.33.1
GraterliaOS:~#

 

--EDIT--

 

A może spróbować przeinstalować system?

Pozdrawiam,

Odnośnik do komentarza
Udostępnij na innych stronach

Witam,

 

Ponownie wracam do tematu.

Zrobiłem dzisiaj aktualizację. Poniżej błędy z ipkg związane z błędem z loga ftp.

 

Może tak jak pytałem w EDIT zrobić reinstalację systemu? Czy to może jednak problem z pamięcią dekodera?

 

Downloading http://addons.graterlia.xunil.pl/release/all/Packages.gz.
Updated source 'addons-all'.
Downloading http://addons.graterlia.xunil.pl/release/mips32el/Packages.gz.
Updated source 'addons-mips32el'.
Downloading http://myszka20premium.graterlia.xunil.pl/release/Packages.gz.
Updated source 'myszka20'.
Downloading http://repositorypremium.graterlia.xunil.pl/release/all/Packages.gz.
Updated source 'gos-all'.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/Packages.gz.
Updated source 'gos-mips32el'.
Downloading http://repositorypremium.graterlia.xunil.pl/release/zgemmahd/Packages.gz.
Updated source 'gos-zgemmahd'.

executing opkg  list-upgradable
glibc-locale - 2.28-31 - 2.29-1
opkg - 0.4.0-1 - 0.4.0-2
enigma2-locale-pl - 2019.01.22 - 2019.02.06
libcrypt - 4.4.2 - 4.4.3
glibc - 2.28-31 - 2.29-1
harfbuzz - 2.3.0 - 2.3.1
enigma2-channels-hotbird-polskie-myszka20 - 2019.01.25-1 - 2019.02.08
enigma2-plugin-openwebif - 1.3.5-8 - 1.3.6-1
libidn2 - 2.0.5 - 2.1.0
tuxbox - 2019.01.26 - 2019.02.02
curl - 7.63.0 - 7.64.0
curl-libs - 7.63.0 - 7.64.0
python-setuptools - 40.7.1 - 40.8.0
enigma2-skin-defaultfhd - 2018.11.23 - 2019.01.31
glibc-locale-pl-pl - 2.28-31 - 2.29-1
enigma2 - 2019.01.21-1 - 2019.02.06
enigma2-picons-hotbird-polskie-400x170x32-myszka20 - 2019.01.25-1 - 2019.02.08
python-cryptography - 2.4.2 - 2.5

executing opkg upgrade && opkg clean
Upgrading glibc-locale from 2.28-31 to 2.29-1 on root.
Upgrading glibc-locale (2.29) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/glibc-locale_2.29-1_mips32el.ipk.
Upgrading opkg from 0.4.0-1 to 0.4.0-2 on root.
Upgrading opkg (0.4.0) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/opkg_0.4.0-2_mips32el.ipk.
Existing conffile /etc/opkg/opkg.conf is different from the conffile in the new package.
The new conffile will be placed at /etc/opkg/opkg.conf-opkg.
Upgrading enigma2-locale-pl from 2019.01.22 to 2019.02.06 on root.
Upgrading enigma2-locale-pl (2019.02.06) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/all/enigma2-locale-pl_2019.02.06_all.ipk.
Upgrading libcrypt from 4.4.2 to 4.4.3 on root.
Breaking circular dependency on libcrypt for glibc.
Upgrading libcrypt (4.4.3) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/libcrypt_4.4.3_mips32el.ipk.
Upgrading glibc (2.29) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/glibc_2.29-1_mips32el.ipk.
Deleting obsolete file /lib/libresolv-2.28.so.
Deleting obsolete file /lib/libanl-2.28.so.
Deleting obsolete file /lib/libBrokenLocale-2.28.so.
Deleting obsolete file /lib/librt-2.28.so.
Deleting obsolete file /lib/libnss_compat-2.28.so.
Deleting obsolete file /lib/libc-2.28.so.
Deleting obsolete file /lib/libdl-2.28.so.
Deleting obsolete file /lib/libnss_hesiod-2.28.so.
Deleting obsolete file /lib/libnss_db-2.28.so.
Deleting obsolete file /lib/libutil-2.28.so.
Deleting obsolete file /lib/libpthread-2.28.so.
Deleting obsolete file /lib/libnsl-2.28.so.
Deleting obsolete file /lib/ld-2.28.so.
Deleting obsolete file /lib/libnss_nis-2.28.so.
Deleting obsolete file /lib/libnss_files-2.28.so.
Deleting obsolete file /lib/libnss_nisplus-2.28.so.
Deleting obsolete file /lib/libm-2.28.so.
Deleting obsolete file /lib/libnss_dns-2.28.so.
Not selecting glibc 2.28 as installing it would break existing dependencies.
glibc (2
.29-1) already installed on root.
Breaking circular dependency on glibc for libcrypt.
Upgrading harfbuzz from 2.3.0 to 2.3.1 on root.
Upgrading harfbuzz (2.3.1) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/harfbuzz_2.3.1_mips32el.ipk.
Deleting obsolete file /usr/lib/libharfbuzz-subset.so.0.20300.0.
Deleting obsolete file /usr/lib/libharfbuzz.so.0.20300.0.
Upgrading enigma2-channels-hotbird-polskie-myszka20 from 2019.01.25-1 to 2019.02.08 on root.
Upgrading enigma2-channels-hotbird-polskie-myszka20 (2019.02.08) on root.
Downloading http://myszka20premium.graterlia.xunil.pl/release/enigma2-channels-hotbird-polskie-myszka20_2019.02.08_all.ipk.
Upgrading enigma2-plugin-openwebif from 1.3.5-8 to 1.3.6-1 on root.
Not selecting glibc 2.28 as installing it would break existing dependencies.
Upgrading enigma2-plugin-openwebif (1.3.6) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/all/enigma2-plugin-openwebif_1.3.6-1_all.ipk.
Deleting obsolete file /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/views/responsive/ajax/renderevtblock.py.
Upgrading libidn2 from 2.0.5 to 2.1.0 on root.
Upgrading libidn2 (2.1.0) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/libidn2_2.1.0_mips32el.ipk.
Deleting obsolete file /usr/lib/libidn2.so.0.3.4.
Upgrading tuxbox from 2019.01.26 to 2019.02.02 on root.
Upgrading tuxbox (2019.02.02) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/all/tuxbox_2019.02.02_all.ipk.
Upgrading curl from 7.63.0 to 7.64.0 on root.
Upgrading curl-libs (7.64.0) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/curl-libs_7.64.0_mips32el.ipk.
Upgrading curl (7.64.0) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/curl_7.64.0_mips32el.ipk.
Not selecting curl-libs 7.63.0 as installing it would break existing dependencies.
curl-libs (7.64.0) already installed on root.
Upgrading python-setuptools from 40.7.1 to 40.8.0 on r
Create symlink...

Your box: h3

Enigma2 update done
Please restart GUI!

New channel list installed

Collected errors:
* remove_obsolesced_files: unlinking /usr/share/enigma2/skin_display.xml failed: No such file or directory.
* opkg_install_pkg: Failed to determine obsolete files from previously installed enigma2

oot.
Upgrading python-setuptools (40.8.0) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/python-setuptools_40.8.0_mips32el.ipk.
Upgrading enigma2-skin-defaultfhd from 2018.11.23 to 2019.01.31 on root.
Upgrading enigma2-skin-defaultfhd (2019.01.31) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/all/enigma2-skin-defaultfhd_2019.01.31_all.ipk.
Upgrading glibc-locale-pl-pl from 2.28-31 to 2.29-1 on root.
Upgrading glibc-locale-pl-pl (2.29) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/glibc-locale-pl-pl_2.29-1_mips32el.ipk.
Upgrading enigma2 from 2019.01.21-1 to 2019.02.06 on root.
Not selecting glibc 2.28 as installing it would break existing dependencies.
Not selecting libcrypt 4.4.2 as installing it would break existing dependencies.
Upgrading enigma2 (2019.02.06) on root.
Downloading http://repositorypremium.graterlia.xunil.pl/release/mips32el/enigma2_2019.02.06_mips32el.ipk.
Deleting obsolete file /usr/bin/enigma2s-2019-01-21.
Deleting obsolete file /usr/bin/enigma2-2019-01-21.
Deleting obsolete file /usr/share/enigma2/skin_display.xml.
Upgrading enigma2-picons-hotbird-polskie-400x170x32-myszka20 from 2019.01.25-1 to 2019.02.08 on root.
Upgrading enigma2-picons-hotbird-polskie-400x170x32-myszka20 (2019.02.08) on root.
Downloading http://myszka20premium.graterlia.xunil.pl/release/enigma2-picons-hotbird-polskie-400x170x32-myszka20_2019.02.08_all.ipk.
Deleting obsolete file /usr/share/enigma2/picon/logos_pik/natgeowildhd.png.
Deleting obsolete file /usr/share/enigma2/picon/1_0_1_4292_2BC0_13E_820000_0_0_0.png.
Deleting obsolete file /usr/share/enigma2/picon/logos_pik/kinotv.png.
Upgrading python-cryptography from 2.4.2 to 2.5 on root.
Not selecting glibc 2.28 as installing it would break existing dependencies.
python-pycparser was autoinstalled and is now orphaned, will remove
Removing python-pycparser (2.19) from root...
Upgrading python-cryptography (2.5) on root.
Downloading http://repositorypremium.graterlia.xunil.p
l/release/mips32el/python-cryptography_2.5_mips32el.ipk.
Deleting obsolete file /usr/lib/python2.7/site-packages/cryptography/hazmat/primitives/serialization.pyo.
Configuring libcrypt.
Configuring glibc-locale.
Configuring glibc.
Configuring python-setuptools.
Configuring python-cryptography.
Configuring tuxbox.
Configuring enigma2-skin-defaultfhd.
Configuring enigma2.
Configuring harfbuzz.
Configuring curl-libs.
Configuring libidn2.
Configuring opkg.
Configuring curl.
Configuring glibc-locale-pl-pl.
Configuring enigma2-locale-pl.
Configuring enigma2-channels-hotbird-polskie-myszka20.
Configuring enigma2-plugin-openwebif.
Configuring enigma2-picons-hotbird-polskie-400x170x32-myszka20.

 

Pozdrawiam,

Leszek

Odnośnik do komentarza
Udostępnij na innych stronach

Błąd z aktualizacji można pominąć. Długo by pisać, o co chodzi, ale to w tym konkretnym przypadku tylko komunikat.

 

Co do FTP...nie mam jeszcze pojęcia.

Na razie ustaliłem, że dotyczy to wąskiej grupy osób i wyłącznie połączenia FTP.

Jeżeli to nie kłopot to zrób kopię systemu i sprawdź:

  • co się stanie po wgraniu kopii;
  • jeżeli będzie źle, to wgraj na czysto i zobacz, co będzie.

Odnośnik do komentarza
Udostępnij na innych stronach

Dołącz do dyskusji

Możesz dodać zawartość już teraz a zarejestrować się później. Jeśli posiadasz już konto, zaloguj się aby dodać zawartość za jego pomocą.

Gość
Dodaj odpowiedź do tematu...

×   Wklejono zawartość z formatowaniem.   Usuń formatowanie

  Dozwolonych jest tylko 75 emoji.

×   Odnośnik został automatycznie osadzony.   Przywróć wyświetlanie jako odnośnik

×   Przywrócono poprzednią zawartość.   Wyczyść edytor

×   Nie możesz bezpośrednio wkleić grafiki. Dodaj lub załącz grafiki z adresu URL.

×
×
  • Dodaj nową pozycję...